By Steel Power Shelving Team | Published: 20 September 2026Fitting out a whole garage from Steel Power's in-stock range costs about $505 for a starter setup of two shelving bays...
Steel Power Shelving Team |
By Steel Power Shelving Team | Published: 20 September 2026A single garage usually takes one straight run of 0.5m deep shelving across the end wall and very little else, while...
Steel Power Shelving Team |
If you have shopped for garage shelving, you have seen a big number on the listing — 800kg, 1200kg — and probably wondered whether a single shelf can really take...
fan Terry |
If you are kitting out an Australian garage, the shelving choice usually comes down to two camps: powder-coated steel racking, or timber and melamine-board shelving (particleboard with a laminated coating,...
fan Terry |
Damp-Proof Storage Shelving for a Queensland Subfloor or Under-House Area Under-house and subfloor spaces are some of the most tempting storage areas in a Queensland home, and some of the...
fan Terry |
Tyres are one of the most awkward things to store in an Aussie garage. They are heavy, they are round, they roll, and left on a damp concrete slab over...
fan Terry |
A loaded steel shelving unit can hold a serious amount of weight, but weight is only safe when it stays where you put it. The most common shelving accident at...
fan Terry |
How to Stop Steel Shelving Rusting in Brisbane's Humid Climate If you store gear in a Brisbane garage, shed or workshop, you already know the enemy is not just clutter...
fan Terry |
By Craig Dunstan, Brisbane Sydney buyers face a different shelving problem to most of the country: the storage space is small, the access is complicated, and half the "Australian" shelving...
fan Terry |
By Craig Dunstan, Brisbane If you are buying garage shelving in Melbourne, here is the honest picture up front. Steel Power Shelving is a Brisbane-based retailer that holds its own...
fan Terry |
By Craig Dunstan, Brisbane No — most home users do not need AS/NZS 4084. It is the Australian and New Zealand standard for steel storage racking: the large commercial racking...
fan Terry |
By Craig Dunstan, Brisbane Moving storage from an attached garage to a backyard shed changes three things: moisture, dust and temperature swings — and moisture is the one that decides...
fan Terry |
By Craig Dunstan, Brisbane A workshop fit-out that works follows four rules: divide the space into zones (bulk storage, workbench, secure storage, floor/vehicle space) before buying anything; run shelving along...
fan Terry |
